UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D. C. 20549

FORM SD

SPECIALIZED DISCLOSURE REPORT

Dana Incorporated

(Exact name of registrant as specified in its charter)

3939 Technology Drive, Maumee, Ohio 43537

(Address of principal executive offices) (Zip Code)

Christopher J. Dawson

(519) 437-0329

(Name and telephone number, including area code of the person to contact in connection with this report.)

Check the appropriate box to indicate the rule pursuant to which this form is being filed, and provide the period to which the information in this form applies:

Section 1 - Conflict Minerals Disclosure

Item 1.01 Conflict Minerals Disclosure and Report

A copy of Dana Incorporated’s Conflict Minerals Report is filed as Exhibit 1.01 hereto and is publicly available at www.dana.com. The website and information accessible through it are not incorporated into this Form SD.

Item 1.02 Exhibit

As specified in Section 2, Item 2.01 of this Form SD, the registrant is hereby filing its Conflict Minerals Report as Exhibit 1.01 to this report.

Section 3 – Exhibits

Item 3.01 Exhibits

The following exhibit is filed as part of this report.

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the duly authorized undersigned.

EXHIBIT 1.01

DANA INCORPORATED

Conflict Minerals Report

For the Year Ended December 31, 2023

Overview

Dana Incorporated (NYSE: DAN), is a U.S. based company with a history dating back to 1904. It is a world leader in providing power-conveyance and energy-management solutions for vehicles and machinery. The company’s portfolio improves the efficiency, performance, and sustainability of light vehicles, commercial vehicles, and off-highway equipment. From axles, driveshafts, transmissions, sealing and thermal products to electrification products including motors, inverters, controllers, e-sealing, e-thermal and digital solutions, Dana supplies nearly every major vehicle manufacturer in the world. As of December 31, 2023, Dana employed approximately 41,800 people and operated in 31 countries.

As described in further detail below, we rely on our direct suppliers to provide information on the origins of tin, tantalum, tungsten and gold (3TG) contained in components and materials supplied to us, including sources of 3TG that are supplied to them from lower tier suppliers. To obtain this information, in accordance with the OECD Guidance (as defined below), we sent a Request For Information (RFI) to direct suppliers representing approximately 7% of our supplier shipping locations for direct components. In addition, all of our supply agreements require our suppliers to provide information about the source of 3TG and smelters.

We have adopted the following Conflict Minerals Policy:

As a company with sales and manufacturing operations throughout the world, we support the sourcing of minerals responsibly, as set out in our Standards of Business Conduct. We support ending the violence and human rights violations in the mining of certain minerals from a location described as the “Conflict Region,” which is in the Democratic Republic of the Congo (DRC) and neighboring countries. The U.S. Securities and Exchange Commission (SEC) adopted final rules to implement reporting and disclosure requirements related to “conflict minerals,” as directed by the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010. The rules require manufacturers who file certain reports with the SEC to disclose whether the products they manufacture or contract to manufacture contain “conflict minerals” that are “necessary to the functionality or production” of those products.

The definition of “conflict minerals” refers to gold, as well as tin, tantalum, and tungsten, the derivatives of cassiterite, columbite-tantalite, and wolframite, regardless of where they are sourced, processed or sold. The U.S. Secretary of State may designate other minerals in the future. We support these requirements to further the humanitarian goal of ending violent conflict in the DRC and in surrounding countries, which has been partially financed by the exploitation and trade of “conflict minerals”.

OUR COMMITMENT:

Dana has based its due diligence processes, in part, on the guidance provided by the Organization for Economic Co-operation and Development (OECD). The framework of the OECD provides practical guidance to companies on a set of actions that can be taken throughout the supply chain to ensure responsible due diligence. Dana has established a global team, reporting to executive leadership, to work through the OECD framework and develop a plan to address each of its focus areas.

This due diligence includes requiring our 3TG suppliers to provide written evidence documenting that raw materials used to produce gold, tin, tantalum and tungsten, used in the materials to manufacture components and products supplied to Dana, originate from outside the “Conflict Region” or, if they originate from within the “Conflict Region,” that the mines or smelters be certified as “conflict free” by an independent third party. The aim is to ensure that only “conflict free” materials and components are used in products that we procure.

If we discover the use of these minerals produced in facilities that are considered to be “non-conflict free” in any material, parts or components we procure, we will take appropriate actions to transition the product to be “conflict free.”

2

Due Diligence Process

Our due diligence measures have been designed to conform, in all material respects, with the framework in the OECD Due Diligence Guidance for Responsible Supply Chains of Minerals from Conflict-Affected and High-Risk Areas (OECD Guidance) and the related Supplements for 3TG. As described above, Dana has adopted a policy which is posted on our website at www.dana.com.

Management System

Dana has established a management system for conflict minerals. Our management system is led by a Senior Manager of Purchasing Analytics who acts as the executive conflict minerals program manager. That individual is supported by other Dana departments, including Legal and Global Sustainability. Management is briefed about the results of our due diligence efforts on a regular basis.

Control Systems

As we do not have a direct relationship with 3TG smelters or refiners, we are engaged and cooperate with other major manufacturers in our industry. Controls include, but are not limited to, our Standards of Business Conduct which outlines expected behaviors for all of our employees, our Standards of Business Conduct for Suppliers, and obligations contained in agreements with our suppliers.

Supplier Engagement

We utilize our own internal supplier management software (Dana1Source) as a part of engaging with our suppliers. In particular, Dana1Source helps us to identify suppliers that provide direct components that might contain 3TG. Taking the information provided in Dana1Source, we are able to determine which suppliers should then receive a Conflict Minerals Reporting Template (CMRT) survey form to complete. Feedback from this exercise has allowed us to analyze and refine which suppliers require further analysis. Further, responses to initial CMRT surveys have allowed us to further rationalize the suppliers that may use conflict minerals in their products and take a more targeted approach to define if any products contain minerals on a forward- looking basis.

All of our supply agreements require suppliers to provide information about sources of conflict minerals as well as smelters and refiners. These requirements set an expected level of reporting to facilitate engagement and the due diligence process.

Identification and Assessment of Risks

Because of our size, the complexity of our products, and the depth, breadth, and constant evolution of our supply chain, we are unable to identify all parties that supply our direct suppliers. Accordingly, we participate in a number of industry-wide initiatives. We have identified 404 direct suppliers whose components may contain 3TG, and we rely on these suppliers to provide us with information about the source of minerals contained in the components supplied to us. In particular, we rely on these suppliers to provide us with information about the source of minerals contained in the components supplied to us. Our direct suppliers are similarly reliant upon information provided by their suppliers. Similar to Dana, many of these suppliers are also subject to Rule 13p-1 under the Securities Exchange Act of 1934. Additionally, Dana uses third-party systems to monitor all suppliers for negative concerns, specifically including conflict minerals and other materials of concern.

3

Products

In determining which of our products might contain 3TG, all of our direct suppliers are given a commodity classification for the type of materials they supply to us and the suppliers for those commodities identified as possibly containing 3TG were included. Additionally, each supplier in Dana1Source is given a regulatory compliance checklist to complete. The results from this checklist enable us to determine which suppliers require further inquiry in addition to the commodity classification.

We cross-reference a list of parts from our International Material Data System (IMDS) database where suppliers identify the products containing 3TG. IMDS is the automobile industry’s material data system. In IMDS, all materials used for automobile manufacturing are collected, maintained, analyzed and archived. We sent a CMRT to each of these suppliers even if 3TG had no product fit or function.

Suppliers with a prior CMRT with no 3TG were excluded from the survey unless otherwise identified by the IMDS database or such a supplier provided a new product identified to contain 3TG.

Standard Operating Procedures

We have adopted comprehensive Standard Operating Procedures through which our conflict minerals program is implemented, managed, and monitored. Updates are provided regularly to senior management.

As described above, we participate in industry-wide initiatives to identify parties in the supply chain. In particular, we are a member and have been actively engaged with the Automotive Industry Action Group (AIAG).

As part of our risk management plan, to ensure suppliers understand our expectations, we have provided supplier training documents through Dana1Source. Dana1Source allows us, among other benefits, to conduct real-time communications with all our suppliers. Conflict minerals information has been incorporated into our supplier information scorecard that documents and retains supplier information used to prevent and reduce risk. CMRT surveys were sent to 164 direct supplier locations.

As described in our conflict minerals policy, we engage any supplier whom we have reason to believe is supplying us with 3TG from sources that may support conflict in the DRC or any adjoining country to establish an alternative source of 3TG that does not support such conflict, as provided in the OECD guidance. We have found no instances where it was necessary to terminate a contract or find a replacement supplier.

4

Independent Third Party Audit of Supply Chain Due Diligence at Smelters and Refiners

We do not typically have a direct relationship with 3TG smelters or refiners and do not perform or direct audits of these entities within our supply chain.

Due Diligence Results

Requested Information

Annually, we send CMRT surveys to our direct suppliers using the CMRT template developed by the Electronic Industry Citizenship Coalition (EICC). The CMRT was developed to facilitate disclosure and communication of information regarding smelters that provides material to a company’s supply chain. It includes questions regarding a company’s conflict-free policy, engagement with its direct suppliers, and a listing of smelters Dana and its suppliers use. In addition, the CMRT contains questions about the origin of conflict minerals included in their products, as well as supplier due diligence. Written instructions and recorded training illustrating the use of the tool is available on EICC’s website. The CMRT is used by many companies in their conflict mineral due diligence processes.

During the reporting period, we reviewed 404 suppliers. After reviewing, we requested additional information from those suppliers where the nature of the component, or the location of the supplier, suggested that those components were likely to contain 3TG and the annual spend was greater than $50,000. This resulted in us requesting a CMRT survey from 164 of the 404 suppliers representing approximately 7% of our 2023supplier shipping locations for direct components.

CMRT Responses

We received responses from suppliers asked to complete the CMRT and reviewed them to determine which suppliers required further engagement. The criteria used to determine whether to follow up with a supplier included untimely or incomplete responses as well as inconsistencies within data reported in the completed CMRT we received. We worked directly with these suppliers to obtain revised responses.

A majority of responses we received provided data at a company or division level or, as described above, the supplier indicated it was unable to identify the smelters or refiners used in components its supplied. As a result, we are unable to determine whether any of the conflict minerals reported by suppliers were contained in components or parts supplied to us or to validate that any of these smelters or refiners are in our supply chain. Three supplier responses were from “off-shelf distributors,” and accordingly, these suppliers have no direct contact with their supply chain.

5

Efforts to Determine Mine or Location of Origin

Through OECD and our RFI process, we have determined that seeking information about 3TG smelters and refiners in our supply chain represents the most reasonable effort we can make to determine the mines or locations of origin of 3TG in our supply chain.

Smelters or Refiners

Based on the information we received during our due diligence process, we believe that the smelters and refiners listed in Annex I to this Conflicts Mineral Report may have been used to process 3TG in our products.

Future Due Diligence Measures

In the next compliance period, we intend to implement steps to improve the information gathered from our due diligence process. The steps include:

6

ANNEX I

SMELTERS AND REFINERS

7

8

9

10